Nason 496-00 Selectclear Spot and Panel 2K Clearcoat

(1 review) Write a Review
Normally Ships within 1-2 Business Days
Maximum Purchase:
2 units
Calculated at Checkout
Nason 496-00 Selectclear Spot and Panel 2K Clearcoat

If force dried, wait 3-6 hours @ 70°F before buffing. If air dried, wait 6-10 hours, depending on temperature and activator, before buffing. Remove dust with soft, dampened cloth and sand with 1500 grit and finer paper. Then polish with medium duty compound and finish with a soft polishing pad to remove any swirl marks. Operate at 1700-2000 RPM.

4:1 Mix: 4 parts 496-00™ Clearcoat 1 part

Nason ® SelectActivator     483-76    (Lo-Temp), Sold seperately.

Nason ® SelectActivator™ 483-78™ (Mid-Temp, Spot Panel), Sold seperately.

Nason ® SelectActivator    483-79™ (Hi-Temp, Multi-Panel), Sold seperately.

VOC LE: 4.2 lb/gal maximum, ready to spray Theoretical Coverage: 478 sq. ft. @ 1 mil Weight Solids: 37.0% ready-to-spray Volume Solids: 29.8% ready-to-spray Recommended Dry Film Thickness: 2.0 mils in 2 coats

1 Review Hide Reviews Show Reviews

  • 5
    Mason 496 clear

    Posted by Bill Cooper on 13th Aug 2022

    Absolutely great stuff!!